Online Solution Annealing Equipment

Recozimento de solubilização em linha

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

  • Five models, YJ40 to YJ100, for Ø12–219 mm pipe at 0.5–4.5 mm wall
  • IGBT inverter medium-frequency induction heating, 80–200 kW
  • Solution treatment under hydrogen protective gas improves the weld structure and relieves stress
  • Indirect cooling keeps the pipe bright

Product introduction

The online bright annealing equipment is made up of: a power system consisting of an IGBT transistor inverter medium-frequency power cabinet and a tank-circuit compensation capacitor cabinet; a bright solution-treatment system consisting of the induction heating coil, cooling water jacket, gas protection device and infrared thermometer; a cooling system consisting of a water-to-water heat exchanger and an external circulating water and cooling unit; a welded-pipe cleaning device; and the electrical control system.

Process characteristics

The stainless steel pipe is heated by induction to the temperature required for solution treatment, and solution-treated in a sealed unit with hydrogen as the protective gas. This improves the structure of the weld and relieves stress, enhancing corrosion resistance. The hydrogen protective gas leaves the pipe bright after solution treatment and speeds up cooling. Once heated to solution temperature, the welded pipe is cooled indirectly, to keep it bright.

Technical parameters

Model Pipe range Wall thickness Production speed Power
YJ40 Ø12–51 mm 0.5–3.0 mm 0–6 m/min 80 kW
YJ50 Ø25–76 mm 0.6–3.5 mm 0–6 m/min 100 kW
YJ60 Ø63–114 mm 1.0–4.5 mm 0–5 m/min 160 kW
YJ80 Ø76–168 mm 1.0–4.5 mm 0–4 m/min 200 kW
YJ100 Ø114–219 mm 1.0–4.5 mm 0–2 m/min 200 kW

Especificação técnica

Especificação técnica da Online Solution Annealing Equipment
ModelsYJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe rangeØ12–219 mm
Wall thickness0.5–4.5 mm
Production speed0–6 m/min
Power80 – 200 kW
HeatingIGBT medium-frequency induction
Protective gasHydrogen

As especificações são configuráveis. Faixa de diâmetro, espessura de parede, velocidade de linha e grau do material são definidos na proposta, de acordo com o que você precisa produzir.

Precisa da ficha técnica completa?

Envie o seu requisito e responderemos com a especificação configurada, o desenho de layout e o levantamento de carga elétrica desta linha.

Solicitar a ficha técnica

Solicitar proposta comercial

Conte o que você precisa produzir. Um engenheiro analisa cada solicitação e responde com uma configuração de linha, não com um folheto. O prazo normal de resposta é de um dia útil.

Seus dados

Inclua o código do país. É o caminho mais rápido para uma resposta técnica.

Define tensão, frequência, rota de embarque e documentação.

Especificação do seu tubo

Tudo é opcional — mas quanto mais informação, mais exata a proposta.

O menor e o maior tubo que você precisa rodar em uma mesma linha.

Como podemos ajudar?

Se você tem um desenho ou uma especificação atual, mencione aqui e enviaremos um endereço para onde mandar.

Também tenho interesse em

Usamos seus dados apenas para responder à sua solicitação. Não vendemos nem compartilhamos e não incluímos você em nenhuma lista de e-mails sem que você peça. Veja nosso aviso de privacidade.

Frequentemente especificado em conjunto

Inner Weld Levelling EquipmentRemoção do cordão interno

Inner Weld Levelling Equipment

Reciprocating mandrel-and-roll unit that rolls the inner and outer weld bead flush with the base metal, in five models for Ø12–219 mm pipe.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Especificações
Round Tube Polishing MachinePolimento de tubo redondo

Round Tube Polishing Machine

Stainless round tube polishing and hairline finishing in three machines, 8-group to large 10-group, for Ø6–133 mm tube.

Machines
8-group (new), 10-group, large 10-group
Polishing size
Ø6–133 mm
Especificações
Square Tube Polishing MachinePolimento de tubo quadrado

Square Tube Polishing Machine

Stainless square tube polishing and hairline finishing in 16-, 32- and 36-group machines, for 13 × 13 to 100 × 100 mm tube at 3–30 m/min.

Machines
16-group, 32-group, 36-group
Polishing size
13 × 13 – 100 × 100 mm
Especificações
Fale com a gente