Online Solution Annealing Equipment

Online solution annealing

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

  • Five models, YJ40 to YJ100, for Ø12–219 mm pipe at 0.5–4.5 mm wall
  • IGBT inverter medium-frequency induction heating, 80–200 kW
  • Solution treatment under hydrogen protective gas improves the weld structure and relieves stress
  • Indirect cooling keeps the pipe bright

Product introduction

The online bright annealing equipment is made up of: a power system consisting of an IGBT transistor inverter medium-frequency power cabinet and a tank-circuit compensation capacitor cabinet; a bright solution-treatment system consisting of the induction heating coil, cooling water jacket, gas protection device and infrared thermometer; a cooling system consisting of a water-to-water heat exchanger and an external circulating water and cooling unit; a welded-pipe cleaning device; and the electrical control system.

Process characteristics

The stainless steel pipe is heated by induction to the temperature required for solution treatment, and solution-treated in a sealed unit with hydrogen as the protective gas. This improves the structure of the weld and relieves stress, enhancing corrosion resistance. The hydrogen protective gas leaves the pipe bright after solution treatment and speeds up cooling. Once heated to solution temperature, the welded pipe is cooled indirectly, to keep it bright.

Technical parameters

Model Pipe range Wall thickness Production speed Power
YJ40 Ø12–51 mm 0.5–3.0 mm 0–6 m/min 80 kW
YJ50 Ø25–76 mm 0.6–3.5 mm 0–6 m/min 100 kW
YJ60 Ø63–114 mm 1.0–4.5 mm 0–5 m/min 160 kW
YJ80 Ø76–168 mm 1.0–4.5 mm 0–4 m/min 200 kW
YJ100 Ø114–219 mm 1.0–4.5 mm 0–2 m/min 200 kW

Technical specification

Technical specification for Online Solution Annealing Equipment
ModelsYJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe rangeØ12–219 mm
Wall thickness0.5–4.5 mm
Production speed0–6 m/min
Power80 – 200 kW
HeatingIGBT medium-frequency induction
Protective gasHydrogen

Specifications are configurable. Diameter range, wall thickness, line speed and material grade are all set during quotation to match what you need to produce.

Need the full data sheet?

Send your requirement and we will reply with a configured specification, layout drawing and power schedule for this line.

Request the data sheet

Request a quotation

Tell us what you need to produce. An engineer reviews every enquiry and replies with a line configuration, not a brochure. Typical reply time is one business day.

Your details

Include your country code. Fastest route to a technical answer.

Determines voltage, frequency, shipping route and documentation.

Your tube specification

All optional — but the more you give us, the more exact the quote.

Smallest and largest tube you need to run on one line.

How can we help?

If you have a drawing or existing spec sheet, mention it here and we will reply with an address to send it to.

I am also interested in

We use your details only to answer your enquiry. We do not sell or share them, and we will not add you to a mailing list unless you ask. See our privacy notice.

Often specified alongside

Inner Weld Levelling EquipmentInner weld levelling

Inner Weld Levelling Equipment

Reciprocating mandrel-and-roll unit that rolls the inner and outer weld bead flush with the base metal, in five models for Ø12–219 mm pipe.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Specifications
Round Tube Polishing MachineRound tube polishing

Round Tube Polishing Machine

Stainless round tube polishing and hairline finishing in three machines, 8-group to large 10-group, for Ø6–133 mm tube.

Machines
8-group (new), 10-group, large 10-group
Polishing size
Ø6–133 mm
Specifications
Square Tube Polishing MachineSquare tube polishing

Square Tube Polishing Machine

Stainless square tube polishing and hairline finishing in 16-, 32- and 36-group machines, for 13 × 13 to 100 × 100 mm tube at 3–30 m/min.

Machines
16-group, 32-group, 36-group
Polishing size
13 × 13 – 100 × 100 mm
Specifications
Chat with us