Inner Weld Levelling Equipment

Remoção do cordão interno

Inner Weld Levelling Equipment

Reciprocating mandrel-and-roll unit that rolls the inner and outer weld bead flush with the base metal, in five models for Ø12–219 mm pipe.

  • Five models, YJ40 to YJ100, for Ø12–219 mm pipe at 0.5–6.5 mm wall
  • Levels the inner and outer weld bead and completely removes the weld reinforcement
  • Built-in mandrel with reciprocating automatic rolling
  • PLC-controlled electro-hydraulic-pneumatic system with rolling-fluid circulation

Equipment composition

The stainless steel pipe inner weld levelling equipment is made up of the inner and outer weld levelling stand; a hydraulic and pneumatic system with fully automatic, PLC-controlled electro-hydraulic-pneumatic control; the roll tooling; and the rolling-fluid circulation unit.

Workflow

The inner weld levelling unit is a reciprocating automatic rolling device with a built-in mandrel, which rolls the stainless welded pipe between rolls. By controlling the rolling force and the number of passes, it levels the inner and outer weld beads and completely removes the weld reinforcement, bringing the weld flush with the base metal.

Technical parameters

Model Pipe range Wall thickness Production speed Power
YJ40 Ø12–50 mm 0.5–2.0 mm 0–6 m/min 4 kW
YJ50 Ø32–76 mm 0.5–3.0 mm 0–6 m/min 4 kW
YJ60 Ø50–114 mm 0.8–3.5 mm 0–4 m/min 5.5 kW
YJ80 Ø89–168 mm 1.0–5.0 mm 0–5 m/min 11 kW
YJ100 Ø127–219 mm 2.0–6.5 mm 0–2 m/min 11 kW

Especificação técnica

Especificação técnica da Inner Weld Levelling Equipment
ModelsYJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe rangeØ12–219 mm
Wall thickness0.5–6.5 mm
Production speed0–6 m/min
Power4 – 11 kW
ControlPLC, fully automatic electro-hydraulic-pneumatic

As especificações são configuráveis. Faixa de diâmetro, espessura de parede, velocidade de linha e grau do material são definidos na proposta, de acordo com o que você precisa produzir.

Precisa da ficha técnica completa?

Envie o seu requisito e responderemos com a especificação configurada, o desenho de layout e o levantamento de carga elétrica desta linha.

Solicitar a ficha técnica

Solicitar proposta comercial

Conte o que você precisa produzir. Um engenheiro analisa cada solicitação e responde com uma configuração de linha, não com um folheto. O prazo normal de resposta é de um dia útil.

Seus dados

Inclua o código do país. É o caminho mais rápido para uma resposta técnica.

Define tensão, frequência, rota de embarque e documentação.

Especificação do seu tubo

Tudo é opcional — mas quanto mais informação, mais exata a proposta.

O menor e o maior tubo que você precisa rodar em uma mesma linha.

Como podemos ajudar?

Se você tem um desenho ou uma especificação atual, mencione aqui e enviaremos um endereço para onde mandar.

Também tenho interesse em

Usamos seus dados apenas para responder à sua solicitação. Não vendemos nem compartilhamos e não incluímos você em nenhuma lista de e-mails sem que você peça. Veja nosso aviso de privacidade.

Frequentemente especificado em conjunto

Round Tube Polishing MachinePolimento de tubo redondo

Round Tube Polishing Machine

Stainless round tube polishing and hairline finishing in three machines, 8-group to large 10-group, for Ø6–133 mm tube.

Machines
8-group (new), 10-group, large 10-group
Polishing size
Ø6–133 mm
Especificações
Online Solution Annealing EquipmentRecozimento de solubilização em linha

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Especificações
Square Tube Polishing MachinePolimento de tubo quadrado

Square Tube Polishing Machine

Stainless square tube polishing and hairline finishing in 16-, 32- and 36-group machines, for 13 × 13 to 100 × 100 mm tube at 3–30 m/min.

Machines
16-group, 32-group, 36-group
Polishing size
13 × 13 – 100 × 100 mm
Especificações
Fale com a gente