Inner Weld Levelling Equipment

Снятие внутреннего грата

Inner Weld Levelling Equipment

Reciprocating mandrel-and-roll unit that rolls the inner and outer weld bead flush with the base metal, in five models for Ø12–219 mm pipe.

  • Five models, YJ40 to YJ100, for Ø12–219 mm pipe at 0.5–6.5 mm wall
  • Levels the inner and outer weld bead and completely removes the weld reinforcement
  • Built-in mandrel with reciprocating automatic rolling
  • PLC-controlled electro-hydraulic-pneumatic system with rolling-fluid circulation

Equipment composition

The stainless steel pipe inner weld levelling equipment is made up of the inner and outer weld levelling stand; a hydraulic and pneumatic system with fully automatic, PLC-controlled electro-hydraulic-pneumatic control; the roll tooling; and the rolling-fluid circulation unit.

Workflow

The inner weld levelling unit is a reciprocating automatic rolling device with a built-in mandrel, which rolls the stainless welded pipe between rolls. By controlling the rolling force and the number of passes, it levels the inner and outer weld beads and completely removes the weld reinforcement, bringing the weld flush with the base metal.

Technical parameters

Model Pipe range Wall thickness Production speed Power
YJ40 Ø12–50 mm 0.5–2.0 mm 0–6 m/min 4 kW
YJ50 Ø32–76 mm 0.5–3.0 mm 0–6 m/min 4 kW
YJ60 Ø50–114 mm 0.8–3.5 mm 0–4 m/min 5.5 kW
YJ80 Ø89–168 mm 1.0–5.0 mm 0–5 m/min 11 kW
YJ100 Ø127–219 mm 2.0–6.5 mm 0–2 m/min 11 kW

Техническая спецификация

Техническая спецификация: Inner Weld Levelling Equipment
ModelsYJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe rangeØ12–219 mm
Wall thickness0.5–6.5 mm
Production speed0–6 m/min
Power4 – 11 kW
ControlPLC, fully automatic electro-hydraulic-pneumatic

Характеристики конфигурируются. Диапазон диаметров, толщина стенки, скорость линии и марка стали определяются на этапе расчёта под то, что Вам нужно выпускать.

Нужен полный технический лист?

Пришлите требования, и мы ответим сконфигурированной спецификацией, планировочным чертежом и ведомостью электрических нагрузок по этой линии.

Запросить технический лист

Запрос коммерческого предложения

Расскажите, что Вам нужно выпускать. Каждый запрос рассматривает инженер и отвечает конфигурацией линии, а не буклетом. Обычный срок ответа — один рабочий день.

Ваши данные

Укажите код страны. Это самый быстрый путь к техническому ответу.

Определяет напряжение, частоту, маршрут доставки и комплект документов.

Спецификация Вашей трубы

Все поля необязательны — но чем больше данных, тем точнее расчёт.

Наименьшая и наибольшая труба, которую нужно выпускать на одной линии.

Чем мы можем помочь?

Если у Вас есть чертёж или существующая спецификация, напишите об этом здесь, и мы пришлём адрес для отправки.

Меня также интересует

Ваши данные используются только для ответа на запрос. Мы не продаём и не передаём их и не вносим Вас в рассылку без Вашей просьбы. См. политику конфиденциальности.

Часто заказывают вместе

Round Tube Polishing MachineПолировка круглой трубы

Round Tube Polishing Machine

Stainless round tube polishing and hairline finishing in three machines, 8-group to large 10-group, for Ø6–133 mm tube.

Machines
8-group (new), 10-group, large 10-group
Polishing size
Ø6–133 mm
Технические характеристики
Online Solution Annealing EquipmentОтжиг на твёрдый раствор в линии

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Технические характеристики
Square Tube Polishing MachineПолировка профильной трубы

Square Tube Polishing Machine

Stainless square tube polishing and hairline finishing in 16-, 32- and 36-group machines, for 13 × 13 to 100 × 100 mm tube at 3–30 m/min.

Machines
16-group, 32-group, 36-group
Polishing size
13 × 13 – 100 × 100 mm
Технические характеристики
Написать нам