Inner Weld Levelling Equipment

Inner weld levelling

Inner Weld Levelling Equipment

Reciprocating mandrel-and-roll unit that rolls the inner and outer weld bead flush with the base metal, in five models for Ø12–219 mm pipe.

  • Five models, YJ40 to YJ100, for Ø12–219 mm pipe at 0.5–6.5 mm wall
  • Levels the inner and outer weld bead and completely removes the weld reinforcement
  • Built-in mandrel with reciprocating automatic rolling
  • PLC-controlled electro-hydraulic-pneumatic system with rolling-fluid circulation

Equipment composition

The stainless steel pipe inner weld levelling equipment is made up of the inner and outer weld levelling stand; a hydraulic and pneumatic system with fully automatic, PLC-controlled electro-hydraulic-pneumatic control; the roll tooling; and the rolling-fluid circulation unit.

Workflow

The inner weld levelling unit is a reciprocating automatic rolling device with a built-in mandrel, which rolls the stainless welded pipe between rolls. By controlling the rolling force and the number of passes, it levels the inner and outer weld beads and completely removes the weld reinforcement, bringing the weld flush with the base metal.

Technical parameters

Model Pipe range Wall thickness Production speed Power
YJ40 Ø12–50 mm 0.5–2.0 mm 0–6 m/min 4 kW
YJ50 Ø32–76 mm 0.5–3.0 mm 0–6 m/min 4 kW
YJ60 Ø50–114 mm 0.8–3.5 mm 0–4 m/min 5.5 kW
YJ80 Ø89–168 mm 1.0–5.0 mm 0–5 m/min 11 kW
YJ100 Ø127–219 mm 2.0–6.5 mm 0–2 m/min 11 kW

Technical specification

Technical specification for Inner Weld Levelling Equipment
ModelsYJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe rangeØ12–219 mm
Wall thickness0.5–6.5 mm
Production speed0–6 m/min
Power4 – 11 kW
ControlPLC, fully automatic electro-hydraulic-pneumatic

Specifications are configurable. Diameter range, wall thickness, line speed and material grade are all set during quotation to match what you need to produce.

Need the full data sheet?

Send your requirement and we will reply with a configured specification, layout drawing and power schedule for this line.

Request the data sheet

Request a quotation

Tell us what you need to produce. An engineer reviews every enquiry and replies with a line configuration, not a brochure. Typical reply time is one business day.

Your details

Include your country code. Fastest route to a technical answer.

Determines voltage, frequency, shipping route and documentation.

Your tube specification

All optional — but the more you give us, the more exact the quote.

Smallest and largest tube you need to run on one line.

How can we help?

If you have a drawing or existing spec sheet, mention it here and we will reply with an address to send it to.

I am also interested in

We use your details only to answer your enquiry. We do not sell or share them, and we will not add you to a mailing list unless you ask. See our privacy notice.

Often specified alongside

Round Tube Polishing MachineRound tube polishing

Round Tube Polishing Machine

Stainless round tube polishing and hairline finishing in three machines, 8-group to large 10-group, for Ø6–133 mm tube.

Machines
8-group (new), 10-group, large 10-group
Polishing size
Ø6–133 mm
Specifications
Online Solution Annealing EquipmentOnline solution annealing

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Specifications
Square Tube Polishing MachineSquare tube polishing

Square Tube Polishing Machine

Stainless square tube polishing and hairline finishing in 16-, 32- and 36-group machines, for 13 × 13 to 100 × 100 mm tube at 3–30 m/min.

Machines
16-group, 32-group, 36-group
Polishing size
13 × 13 – 100 × 100 mm
Specifications
Chat with us