Roll Tooling & Moulds

Roll tooling & moulds

Roll Tooling & Moulds

Welded pipe mill moulds in Cr12MoV / SKD11 die steel, 60–63 HRC, for round tube Ø5–630 mm and square tube up to 300 × 300 mm.

  • Round tube Ø5–630 mm, square 10 × 10 to 300 × 300 mm, rectangular 20 × 10 to 300 × 200 mm
  • Cr12MoV / SKD11 die steel, hardened to 60–63 HRC
  • Roundness and flatness tolerance ±0.05 mm
  • Vacuum cryogenic treatment between rough and finish turning

Product introduction

Welded pipe mill moulds cover round, square, plum-blossom, flat, fan-shaped, polygonal, single- and double-groove, door-frame and special-shaped pipe, chimney welded pipe, petroleum pipeline welded pipe and more. They are made from high-quality Cr12MoV / SKD11 die steel, which combines high wear resistance, toughness, resistance to high pressure, high hardness and good hardenability.

Machining process

  1. Raw material inspection
  2. Sawing
  3. Rough turning
  4. Semi-finish turning
  5. Vacuum cryogenic treatment
  6. Second finish turning
  7. Polishing
  8. Wire-cut keyway
  9. Inspection
  10. Cleaning
  11. Packaging
  12. Crating
  13. Packing list and shipment

Technical parameters

Type Specification Material Tolerance Hardness
Round tube Ø5–630 mm Cr12MoV / SKD11 Roundness ±0.05 mm 60–63 HRC
Square tube 10 × 10 – 300 × 300 mm Cr12MoV / SKD11 Flatness ±0.05 mm 60–63 HRC
Rectangular tube 20 × 10 – 300 × 200 mm Cr12MoV / SKD11 Flatness ±0.05 mm 60–63 HRC

Technical specification

Technical specification for Roll Tooling & Moulds
Round tubeØ5–630 mm
Square tube10 × 10 – 300 × 300 mm
Rectangular tube20 × 10 – 300 × 200 mm
MaterialCr12MoV / SKD11
Hardness60–63 HRC
ToleranceRoundness / flatness ±0.05 mm

Specifications are configurable. Diameter range, wall thickness, line speed and material grade are all set during quotation to match what you need to produce.

Need the full data sheet?

Send your requirement and we will reply with a configured specification, layout drawing and power schedule for this line.

Request the data sheet

Request a quotation

Tell us what you need to produce. An engineer reviews every enquiry and replies with a line configuration, not a brochure. Typical reply time is one business day.

Your details

Include your country code. Fastest route to a technical answer.

Determines voltage, frequency, shipping route and documentation.

Your tube specification

All optional — but the more you give us, the more exact the quote.

Smallest and largest tube you need to run on one line.

How can we help?

If you have a drawing or existing spec sheet, mention it here and we will reply with an address to send it to.

I am also interested in

We use your details only to answer your enquiry. We do not sell or share them, and we will not add you to a mailing list unless you ask. See our privacy notice.

Often specified alongside

Stainless Steel Decorative Pipe Making MachineDecorative tube mills

Stainless Steel Decorative Pipe Making Machine

Argon-arc welded stainless pipe making machine in four models, YJ40S to YJ60, for Ø6–114 mm tube at 0.2–3.5 mm wall.

Models
YJ40S · YJ40 · YJ50 · YJ60
Production capacity (tube OD)
Ø6–114 mm
Specifications
High-End Industrial Pipe Making MachineHigh-end industrial mills

High-End Industrial Pipe Making Machine

Industrial pipe making machine with intelligent electronic control, in five models for Ø16–168 mm stainless pipe at 0.7–8.0 mm wall.

Models
YJ40 · YJ50 · YJ60 · YJ60L · YJ80
Production capacity (tube OD)
Ø16–168 mm
Specifications
Stainless Steel Industrial Pipe Making MachineIndustrial pipe mills

Stainless Steel Industrial Pipe Making Machine

Industrial stainless pipe making machine in five models, YJ40 to YJ80, for Ø16–168 mm pipe at 0.7–8.0 mm wall, argon arc or plasma welded.

Models
YJ40 · YJ50 · YJ60 · YJ60L · YJ80
Production capacity (tube OD)
Ø16–168 mm
Specifications
Chat with us