A row of blue forming stands on a tube mill at the Yongjian Machinery works, their forming rolls and height hand wheels in line

Tube mill equipment manufacturer · Foshan, China

Stainless steel tube mills, built and tooled in-house.

Complete welded tube and pipe production lines from Ø5 – 630 mm — decorative, industrial, high-end industrial and large-diameter. We machine our own forming rolls, so the part that decides your tube quality is made by the people who built your mill.

  • Installed in 12+ countries
  • In-house roll tooling
27
Years manufacturing

Founded in 1999

18,800 m²
Production building

Gaoming District, Foshan

58
Sets of professional equipment

Including machining centres and CNC lathes

28
Technical personnel

Design, production and after-sales

See the plant before you book the flight

A factory visit is what settles most capital equipment decisions, and it is also a long flight. Start here instead — our own film of the works — and come and see the rest in person when you are ready.

Hosted on YouTube. Nothing is sent to Google until you press play.

Complete tube production lines

From decoiler to run-out table. Every line below is configured around what you need to produce, not sold from a fixed catalogue.

Stainless Steel Decorative Pipe Making MachineDecorative tube mills

Stainless Steel Decorative Pipe Making Machine

Argon-arc welded stainless pipe making machine in four models, YJ40S to YJ60, for Ø6–114 mm tube at 0.2–3.5 mm wall.

Models
YJ40S · YJ40 · YJ50 · YJ60
Production capacity (tube OD)
Ø6–114 mm
Specifications
Stainless Steel Industrial Pipe Making MachineIndustrial pipe mills

Stainless Steel Industrial Pipe Making Machine

Industrial stainless pipe making machine in five models, YJ40 to YJ80, for Ø16–168 mm pipe at 0.7–8.0 mm wall, argon arc or plasma welded.

Models
YJ40 · YJ50 · YJ60 · YJ60L · YJ80
Production capacity (tube OD)
Ø16–168 mm
Specifications
High-End Industrial Pipe Making MachineHigh-end industrial mills

High-End Industrial Pipe Making Machine

Industrial pipe making machine with intelligent electronic control, in five models for Ø16–168 mm stainless pipe at 0.7–8.0 mm wall.

Models
YJ40 · YJ50 · YJ60 · YJ60L · YJ80
Production capacity (tube OD)
Ø16–168 mm
Specifications
Precision Large-Diameter Industrial Pipe Making MachineLarge-diameter mills

Precision Large-Diameter Industrial Pipe Making Machine

Plasma-welded large-diameter industrial pipe making machine in five models, YJ100 to YJ150, for Ø168–630 mm pipe at 2.0–12.0 mm wall.

Models
YJ100 · YJ100L · YJ120 · YJ130 · YJ150
Production capacity (tube OD)
Ø168–630 mm
Specifications
Online Solution Annealing EquipmentOnline solution annealing

Online Solution Annealing Equipment

Induction bright solution annealing under hydrogen, inline on the pipe mill, in five models for Ø12–219 mm pipe at 80–200 kW.

Models
YJ40 · YJ50 · YJ60 · YJ80 · YJ100
Pipe range
Ø12–219 mm
Specifications
Roll Tooling & MouldsRoll tooling & moulds

Roll Tooling & Moulds

Welded pipe mill moulds in Cr12MoV / SKD11 die steel, 60–63 HRC, for round tube Ø5–630 mm and square tube up to 300 × 300 mm.

Round tube
Ø5–630 mm
Square tube
10 × 10 – 300 × 300 mm
Specifications

What actually differs between mill suppliers

Most tube mills look alike in a photograph. The differences show up two years in — in tooling lead times, in whether the line still holds tolerance, and in whether anyone picks up the phone. These are the four places we are genuinely different.

The machine shop at the Yongjian Machinery factory, where forming stands are built up and fitted with their hand wheels before paint
  • We machine our own roll tooling

    Rolls decide your tube quality, and most mill builders buy them in. We cut ours in-house, which means a tooling problem is a conversation with the people who made it — not a three-month wait on a third-party supplier.

  • Ø5 – 630 mm under one roof

    Decorative, industrial, high-end industrial and large-diameter lines all come from the same factory. You are not being sold the only machine we happen to make — we configure to what you actually need to produce.

  • An engineer answers your enquiry

    Send a specification and you get a line configuration back with the reasoning attached: why that mill size, why that annealer, what the realistic output is. Not a price list.

  • Commissioning on your floor

    We install, run the line to its rated output with your material, and train your operators before we leave. A mill that nobody on site can set up is not a working mill.

Diameter range

Ø5 – 630 mm

Across the full equipment range, from capillary to large-bore pipe.

Tube shapes

RoundSquareRectangularSpecial-shaped

Industries served

Metallurgy · Building materials · Automotive · Light industry · Pharmaceutical · Petroleum

Aerial view of the Yongjian Machinery works in Gaoming District, Foshan — the office block alongside a solar-panelled workshop

An 18,800 m² production building

Machining, fabrication, assembly and test-running happen on one site in Gaoming District, Foshan. Owning the premises matters more than it sounds: it is why we can hold roll tooling capacity in-house, and why a buyer can walk the floor and watch their own line run before it ships.

  • CNC machining centres for roll and shaft work
  • Full line assembly and test-running before shipment
  • Buyers welcome to witness their line in production
  • Foshan City, Guangdong Province — 1 hour from Guangzhou airport

Send us your tube specification

Diameter range, wall thickness, material grade and target output. We will reply with a configuration and the reasoning behind it — not a generic price list.

Reply within one business dayEngineer, not a call centre

Chat with us